We design, build and maintain machinery for free trade zone companies in the Dominican Republic.
What we solve
The bar spins and the cutting edge advances: each pass leaves the diameter the drawing calls for.
n = 1000 · Vc / (π · D). Indicative starting values with a carbide insert: the actual process sheet depends on the tool, the workholding and the machine. Rotation is shown slowed down and feed sped up.
The cutter spins and the material moves beneath it to clear pockets, face surfaces and leave contours a lathe cannot reach.
n = 1000 · Vc / (π · D). Indicative starting values with a carbide insert: the actual process sheet depends on the tool, the workholding and the machine. Rotation is shown slowed down and feed sped up.
We design, build, repair and modify molds and dies. In injection molding, wall thickness rules: cooling time grows with its square.
t = s² / (π² · α) · ln(4/π · (Tm − Tw) / (Te − Tw)). Indicative datasheet values for the part shown. The cycle is sped up.
Anodizing, Teflon coating and anticorrosion coatings decide how long a part lasts. In anodizing, thickness comes from current and time in the bath.
Rule of thumb for Type II sulfuric anodizing, about 0.33 µm per A/dm² per minute. Indicative values; bath time is sped up.
Every fault leaves its signature on the spectrum. Reading it in time lets you plan the shutdown instead of suffering it.
BPFO peaks with harmonics and ±1X sidebands: outer race defect.
A demonstration of how a spectrum is read, with illustrative amplitudes, not a measurement.
CNC machining, precision turning and milling, and industrial parts made to drawing.
Injection molds, dies, and their repair, modification and maintenance.
Custom machinery for free trade zones, automation and steel structures.
Teflon coating, anodizing, anticorrosion coatings and surface treatments.
Preventive, corrective and predictive, with vibration analysis.
Industrial electrical work, air conditioning, plumbing, networks and supervision.
Rapid response team, monthly or annual contracts and on-site assistance.
MECNIX Group brings together in one team what a plant usually has to source separately: design, machining, molds, finishing and maintenance.
We work with free trade zones and manufacturers, from CAD design to on-site assistance.
Choose the service and tell us what you need. If you have a drawing, a photo or a video, attach them to the request; if not, we can also start from the physical part or from the problem you want to solve.
Yes. With reverse engineering we start from the existing part, take its measurements and rebuild its geometry so it can be made again.
Drawings and models in PDF, DWG, DXF, STEP, IGES or SLDPRT, as well as photos and videos. The request accepts up to 4 MB in total; if your files are larger, send the request without them and we will arrange them later.
In turning the part spins and the tool advances along it, so it suits shafts and bushings. In milling the tool spins and the material moves, so it suits flat faces, pockets and contours.
Preventive follows a schedule, corrective repairs a fault that has already happened, and predictive measures the condition of the machine, for example with vibration analysis, in order to act before it fails.
Yes, monthly or annual, along with a rapid response team, permanent technical supervision and specialized on-site assistance.
Machine down? Skip the form and call us.
Choose the service, tell us what you need and attach your drawing, a photo or a video if you have them. It takes three steps, and your answers are kept if you reload the page.